HANDRAIL BRACKET - OPEN
Astral handrail bracket for use with 43mm diameter tube. Supplied with rawl plugs, gaskets and screws. Made from Stainless Steel Grade AISI-316
HANDRAIL BRACKET - CLOSED
Astral handrail brackets are regarded as the best on the market, these are designed for their 43mm stainless steel tube and are made from grade AISI-316. Supplied with gaskets, rawl plugs and screws.
GRAB RAILS UPRIGHT MODEL
 Stainless steel grab rails 43mm diameter AISI 316 grade. Supplied with screws and plugs for fixing to pool surround.
Can be used with Split pool ladder. 800mm H x 470 W x 225mm between the legs.
SWIMMING POOL HANDRAIL
Astral swimming pool handrail made from stainless steel grade AISI-316. supplied in one continuous length as below with sealed ends. Tube is 43mm diameter, designed to be used with handrail brackets 07789 & 08013
SWIMMING POOL GRAB RAIL
This range of swimming pool grab rails is available in two mode different installation types. One the embedded range need to be fixed into the pool shell and pool suround, the Flange range is simply screwed to the pool floor and paving using the fitting provided. See the attached pdf showing dimensions. Two rails are included in a pack.
Made from polished 43mm diameter stainless steel grade AISI-316
EXTRA REACH GRAB RAILS
Extra reach rails are normally installed over steps in pools to aid people entering and exiting the swimming pool. There are two variations available; the 'Embedded' version that is supplied complete with anchors & fixing and needs to be cemented into the ground. The 'Flange' version simply fixes to the surface of the pool surround with large bolts and expanding plugs which are again supplied with the rails.
The dimensions for the two rails are identical - 800mm H x 1250mm Overal width x 203mm leg spacing.
If you need any extra information please call or click on the attached pdf.
GRAB RAILS WITH RECTANGULAR BASE
Stainless steel grab rails 43mm diameter AISI 316 grade. Supplied with screws and plugs for fixing to pool surround.
Can be used with Split pool ladder. 800mm H x 470 W x 150mm between the legs.
CERTIKIN ABS HANDRAIL BRACKETS
GRAB RAILS 800 X 800
In Polished stainless steel AISI 316 43mm tube. Exit grab rails supplied as pair complete with fixing plates, gaskets, screws and raw plugs.
|
