DECK BOX LID LIGHT
This is a very ingenious but simple design. It replaces the existing lid of a Certikin deck-box and converts it to an attractive LED light. Designed for new builds or retro-fits, it’s effortlessly installed in just a couple of minuets. Available in blue, green and white, it includes one lid-light, one large and one small ’O’ ring. The electrical power loading is very low (approx 2.5 Watt) and will put no significant extra load on the transformer.
CERTIKIN 300W SLIM LIGHT - COMPLETE
 Slim light & niche - Corrosion resistant front plate inserts made of brass/nickel. Micallef style gland inside the niche prevents water entering the conduit. IP68 rated built-in gland on the light housing eliminating the need for hot melt compounds.
Locating lugs and combi housing screws make bulb changing easier
Threaded conduit fitting on back of niche to ease installation
Clip-on faceplate on liner light to cover unsightly screws
Easy to secure cover plates to finish off concrete pool light
Each light should have a minimum cable run of 5 metres
CERTIKIN 'SLIM' LIGHT GUTS - 300W
Sealed Beam Replacement Internals - 'guts' for 300watt 12 volt pool light.
Will retro fit into most underwater swimming pool lights. This is the light bulb and waterproof front housing including the cable.
CERTIKIN `SLIM' 300w LIGHT GUTS AND NICHE ONLY
Slim light & niche
Light internals ’guts’ can be installed in older style light niches
Corrosion resistant front plate inserts made of brass/nickel
Micallef style gland inside the niche prevents water entering the conduit
IP68 rated built-in gland on the light housing eliminating the need for hot melt compounds
Locating lugs and combi housing screws make bulb changing easier
Threaded conduit fitting on back of niche to ease installation
Clip-on faceplate on liner light to cover unsightly screws
Easy to secure cover plates to finish off concrete pool light
Note - Old style 3/4" BSP threaded niches are available on request (SPC455T-concrete/SPC456T-liner)
CERTIKIN UNDERWATER LIGHT CONNECTOR
.
CERTIKIN HALOGEN LIGHTS COMPLETE
3 times the life expectancy of sealed beam unit
100W output means one third of the normal running costs
New light transformer for up to 4 x halogen light units. Therefore PU91011CH/4 requires one transformer only
Ideal for commercial applications
Operating voltage for these units should be between 11-11.5V at the deck box
Cable lengths can be supplied to suit any requirements - please call the Pools Technical Office
Each light installation should have a minimum cable run of 5 metres
The vandal proof lenses are fitted as standard
CERTIKIN HALOGEN LIGHT GUTS AND NICHE ONLY
3 times the life expectancy of sealed beam unit
100W output means one third of the normal running costs.
CERTIKIN HALOGEN LIGHT GUTS WITH CABLE
LIGHT GUTS AND CABLE.
TK LED LIGHTS COMPLETE
LED lights white/blue
UNDER WATER TRANSFORMERS
Under water light transformers for Halogen and standard 300 watt lights.
RAMP LIGHT
RAMP LIGHT COMPLETE UNIT EXC. TRANSFORMER 100W HALOGEN BULB
|
