| |
|
Heatsavr Liquid Cover |
|
 
ECOSAVR (Heatsavr)
EcoSavr is the same liquid as HEATSAVR but designed for domestic use as it requires no dosing equipment. Simply Place the Fish in the bottom of the pool and the liquid is slowly released over a period of upto 30days.
Evaporation accounts for between 70 and 90% of swimming pool heat loss. Ecosavr can increases pool temperature by creating a transparent pool cover, allowing solar energy to enter the water. By reducing evaporation (up to
40%), the solar energy is trapped, keeping the pool warmer longer and actually extending your pool season. Both water and heat are conserved. UNHEATED POOLS ARE NATURALLY WARMER OR HEATED POOLS COST LESS TO RUN
Coverage
One Ecosavr should be used for a pool area of about 31 to 42 square metres (300 - 400 sq. ft.) for approximately one month; larger pools will require two Ecosavrs.
Remember to restock your pool every four weeks to ensure maximum benefit.
Benefits
Saves Money Time Water Heat
Unheated pools are naturally warmer
Heated pools cost less to run
No cover to roll up or store
Pool looks open and refreshing
One Ecosavr lasts up to a month (up to 40 sq.m)
Reduces heat & water loss by up to 40%
Does not interfere with pool filters or chemicals
How Ecosavr Works
Ecosavr is part of a family of water conservation products, which includes Heatsavr and WaterSavr. Heatsavr in bulk liquid form is used on larger domestic pools and commercial pools, whereas WaterSavr is for reservoirs and lakes. Each product uses the same basic principles to inhibit evaporation, reducing heat and water loss. Ecosavr has been scientifically developed as a simple and convenient method of administering the proven Heatsavr liquid into the smaller swimming pool. "Eco" contains enough Heatsavr liquid to treat a standard domestic pool of up to 40 m2 for about one month. Larger pools will require two Ecos.
Ecosavr has been designed to sink to the bottom of the pool. A patented release valve in the top fin of Ecosavr slowly releases the Heatsavr liquid into your pool. Just cut along the dotted line, and drop "Eco" into your pool. If you have an automatic pool vacuum, please tie "Eco" to a ladder or other fixture to raise it above the pool bottom. A punch-out hole is provided in the top fin.
The Heatsavr liquid released by Ecosavr forms an invisible mono-molecular cover on the surface of the water. The cover is colourless, tasteless, odourless and undetectable on the skin.
 
HEATSAVR LIQUID POOL COVER - 2LTR
For over fifty years, scientists have known that a monolayer (one molecule thick) spread across the surface of a liquid can dramatically reduce evaporation and energy loss. Many companies attempted to develop a technology, but until Flexible Solutions developed their patented Heatsavr, which they first introduced to the North American market over 12 years ago, no other company had been able to make a monolayer spread reliably and inexpensively or to regroup effectively after the water had been disturbed.
In non-technical terms Heatsavr is a mixture of carefully chosen ingredients which are lighter than water and which automatically float to the surface. The particles of the liquid are attracted to each other so that they always try to form a perfect very thin layer over the whole pool surface. They are individually so small that they are 500 times smaller than the spaces in a super high quality filter.
Unlike a conventional pool cover which has to be removed from the pool for swimming, Heatsavr breaks apart whenever the water is sufficiently disturbed but the monolayer reforms whenever the water becomes calm again. Consequently Heatsavr adjusts perfectly to changing activity levels in the pool throughout the day. A variable and flexible cover that automatically works whenever and wherever the pool surface is calm
Heatsavr enables any swimming pool to reap the unquestionable energy saving benefits of a pool cover without any of the aesthetic or practical disadvantages.
Heatsavr is a patented product developed over 12 years ago by Flexible Solutions of Canada, an AMEX quoted company which is in the forefront of evaporation control technology. www.flexiblesolutions.com
Heatsavr is a bio-degradable liquid, which forms a transparent monomolecular layer over the surface of a swimming pool whenever it is calm. This layer significantly reduces evaporation, which not only saves on water heating but with indoor pools can reduce the cost of humidity control and air heating requirements. An automatic dosing system ensures that the correct dose of Heatsavr is added to the pool at the same time each day.
Proven Energy savings up to 50%
Transparent More aesthetically acceptable than a conventional cover
No unsightly roller
Reduces humidity on indoor pools
Far more convenient, simpler and easier to use than a conventional cover
Greater flexibility works whenever the pool surface is calm 24 hours per day
Automatic dosing ensures correct and reliable application.
Fully and independently tested for Safety Non-Toxic and Biodegradable
Undetectable by pool users tasteless, odourless, no residue on hair or clothing
Saves water otherwise lost by evaporation
Sold in 2 ltr Bottles.
Heatsavr Dosing
 Heatsavr biodegrades it has what is called a 2 day half life - which means that in 2 days 50% of it has biodegraded.
The standard dose rate for pools maintained at normal swimming temperatures is between 0.8 and 1 ml per m².
The dose rate is increased up to 1.6 ml per m² for spas and higher temperature hydrotherapy pools
Heatsavr Automatic Dosing System
Easy and inexpensive to install the Heatsavr automatic dosing system provides a reliable and accurate method of ensuring that the pool benefits from the maximum energy savings possible. Fully programmable to suit pool size and hours of operation, it only requires a weekly resevoir check with top up when necessary.
It ensures that the correct dose is added to the pool regularly and at the same time.
For domestic and smaller commercial pools up to a surface area of about 150 m² then the 2 litre container in which Heatsavr is supplied also acts as the reservoir and the screw cap on the container is replaced by a special fitting for connecting to the pump.
For larger pools a 25 litre day tank with bund tank is normally used as the Heatsavr reservoir.
For multi pool complexes, each pool will require its own dosing unit but dependant on plant room layout and location of injection points one day tank may suffice.
See the attached PDF for more information on installing the dosing equipment.
Advanced Setting Up Instructions for the Automatic Dosing on HeatSavr
Heatsavr has to be added to the pool water on a daily basis to maintain its effectiveness. This is because Heatsavr biodegrades it has what is called a 2 day half life - which means that in 2 days 50% of it has biodegraded.
See the Attached PDF for the full instructions on setting up the dosing pump.
|
|
|
|
